Set Up Site-to-Site VPN with Door
Configure an IPsec VPN tunnel between Soracom VPG and your on-premises network
This guide walks through configuring an IPsec VPN tunnel between a Soracom Virtual Private Gateway (VPG) and your on-premises network or cloud VPC using Soracom Door.
Prerequisites
- A Soracom account with VPG enabled
- An IPsec-capable VPN gateway on your network
- Public IP address for your VPN endpoint
Steps
- Create a VPG in the Soracom console
- Configure Door with your VPN gateway's public IP and pre-shared key
- Set up the matching tunnel on your VPN gateway
- Verify connectivity with a test device
What you'll achieve
- Devices on cellular connect through Soracom's private network
- Traffic flows through an encrypted IPsec tunnel to your infrastructure
- No public internet exposure for device data
Related
- Virtual Private Gateway — VPG overview
- IPsec VPN — Door reference
- Private Networking — Networking concepts